2 X Wheel Hub Bearing Assembly Front For Nissan Altima 2007 2008-2013 2.5L 5 Lug

Description

Specifications :
- Fits both LH (Driver Side) & RH (Passenger Side) - Has ABS sensor w/stainless steel sensor & plastic wire clips - Direct fit, designed for vehicle specific application on all makes and models - Latest generation design used in manufacturing our hub assemblies - High quality seal design ensures a clean, long lasting hub bearing - Sensors designed to match specific make and model - Precision machined and pre-coated with anti-corrosion lubricant - Manufactured for quick and easy installation
For the following years and models:
Premium
Best choice of motor parts
2 X Wheel Hub Bearing Assembly Front For Nissan Altima 2007 2008-2013 2.5L 5 Lug
Specifications :
- Fits both LH (Driver Side) & RH (Passenger Side)
-
Has ABS sensor
w/stainless steel sensor & plastic wire clips
- Direct fit, designed for vehicle specific application on all makes and models
- Latest generation design used in manufacturing our hub assemblies
- High quality seal design ensures a clean, long lasting hub bearing
- Sensors designed to match specific make and model
- Precision machined and pre-coated with anti-corrosion lubricant
- Manufactured for quick and easy installation
For the following years and models:
Fits Nissan Altima 2007 2.5L 4 Wheel Abs
Fits Nissan Altima 2008-2012 2.5L 4Cyl Engines Only
Fits Nissan Altima 2013 2.5L 4Cyl S Coupe
?
1 Year Warranty
How to Install a Wheel Bearing Hub Assembly :
1. Park the vehicle on a flat, level paved or concrete surface. Place the vehicle in gear or park and apply the parking brake.
2. Place a wheel chock behind a Front tire (or front if you're doing a Front hub-bearing assembly).
3. Loosen the lug nuts on the wheel of the hub bearing you're replacing with the breaking bar and a socket; do not remove them.
4. Lift the wheel with the floor jack in a safe and secure manner. Support the vehicle on a jack stand, preferably on the frame rail if present.
5. Remove the lug nuts and wheel.
6. Locate the caliper bolts and remove them with the ratchet and a socket.
7. Pry the caliper off gently using a large straight-edged screwdriver and support the caliper on the coil spring with a bungee cord. Do not allow the caliper to dangle on the rubber brake hose.
8. Locate the caliper bridge bolts (if applicable) and remove them with the ratchet and a socket. You may want to break them loose with the breaking bar first if they're really tight. On some vehicles, the brake pads will remain in the bridge and can be removed by prying out with the screwdriver. On other models, the pads stay intact and may be clipped to the caliper. If you have to remove the pads, do so by taking note how they were placed in the bridge and be sure you're able to put them back in the same manner they were extracted.
9. Remove the rotor. If it is stuck to the hub, you may have to hit it with a large rubber mallet. Use a rubber mallet if you're not going to replace the rotor, so you don't damage the surface.
10. Remove any ABS wires attached to the hub bearing assembly (if applicable) or unclip the wire and trace it to the plug. In many applications, if the ABS wire is integrated with the wheel-bearing hub assembly, a new one will come with it. If you're not sure, check the box of the new bearing and if there's an ABS wire, follow the wire until you locate the plug, unplug it and unclip it from its mounts. If ABS is present but not integrated with the bearing assembly, remove the sensor from the bearing with a ratchet and socket.
11. Remove the spindle nut with the breaking bar and a spindle nut socket. Remove the washer behind the spindle nut.
12. Locate the wheel-bearing assembly bolts behind the knuckle, and loosen them with the breaking bar and socket. The location of these can sometimes create a tight area to place a socket and tool on to remove them with. You may have to apply some ingenuity. Replace the socket on the ratchet to extract the bolts quickly and easier. Most hubs have three or four bolts.
13. Install the slide hammer onto the lug studs and secure with tightened lug nuts. This may take several attempts and a couple of breaks in between to remove the hub bearing from the knuckle. Pay close attention to your progress and try to determine when the bearing will separate. Take note of how the backing plate is installed between the knuckle and the bearing so you can replace it in the same manner.
14. Sand off the rust and corrosion around the knuckle with a fine- to medium-grade sandpaper. Move the drive-shaft spindle around to get it out of your way. Take your time when doing this and make sure it's as clean as possible.
15. Place the backing plate in its original position and place the new bearing onto the knuckle. Manipulate the drive-shaft spindle splines into the center of the hub bearing. Push the bearing on as far as you can, making sure to line it up correctly if ABS lines or plugs are present.
16. Replace the wheel-bearing assembly bolts. They're pretty long, so as soon as you can thread them into the new bearing, start to tighten them. Pull the bearing in by tightening the bolts a little bit at a time and then switching to the next bolt to make sure the bearing assembly does not shift in the knuckle and cause damage. Once the bearing is drawn in flush, use the breaking bar to get the bolts as tight as you can get them.
17. Replace washer and spindle nut and tighten to proper torque specifications with the half-inch drive torque wrench and spindle socket.
18. Replace the brakes in the same manner you extracted them. You may need to push the caliper piston in a bit with a C-clamp to get it over the rotor. Plug in the ABS lines or reattach them to the bearing, if applicable.
19. Replace the tire and lug nuts, and tighten the lug nuts as tight as you can get them.
20. Lower the vehicle and tighten the lug nuts in an alternate fashion with the torque wrench and socket at the correct wheel nut specifications torque setting.
21. Pump the brake pedal if you had to push the caliper piston in with a C-clamp to restore hydraulic pressure to that caliper piston.
22. Remove the wheel chock, release the parking brake, and go for a test drive.
Item Specifics
Brand
Preminumwheel spacer
Manufacturer Part Number
PWS993802002
Position on Vehicle
Driver Side or Passenger Side Front
Warranty
12 months
ABS Sensor
Yes（Has ABS with Tone Ring Sensor）
Packing
2 Pcs wheel bearings & hub
Spline Quantity
29
Lug Quantity
5 Lugs
Flange Bolt Hole Quantity
4
Flange Shape
Rectangle
Material
steel
Surface Finish
Polished, Rust Protected
Weight
16LB
Bolt Circle Diameter
4.5In.
Brake Pilot Diameter
2.68In.
Flange Diameter
5.35In.
Flange Offset
1.6In.
Hub Pilot Diameter
3.66In.
Wheel Pilot Diameter
2.6In.
Interchange Part Number
wheel bearings 513294
Fitment Chart
Fits Nissan
Cross number
402029HC0A 40202JA000 40202JA010
Payment
We accept paypal only
We only ship to verified PayPal addresses. Please make sure your PayPal address is verified and up to date before sending payment. We cannot change any address after checkout has been completed. Please make sure you submit your correct address!
Shipping
1. Items will be shipped within 24 hours after getting your verified payment.
2. 2.US Storage& UNITED STATES by fast shipping. We offer 24 hours dispatch and estimated delivery time is 3-5 business days.except weekend and other irresistible factors. Please feel free to contact us if you haven't receive the item after the estimated shipping time
Returns
1.Defective products can be exchanged or returned for full price refund within 30 days after you receive the item.
2.Any returning or exchanging item must be in new condition and cannot be tempered.
3. Buyers are responsible to pay the return shipping fee or exchange shipping fee.
4.Please contact us by eBay email first before you return the item Every week we have new items put on sale , if the items you don't need now ,you also cam often come to visit my store, maybe one day you can buy the items in our stores which you need.
Contact Us
We hightly appreciate that you can refer to us or email us before you leaving Negative feedback or Neutral feedback .We will offer help to resolve your problems as fast as possible.
Premium
Best choice of motor parts
DESCRIPTION
PAYMENT
SHIPPING
RETURN POLICY
CONTACT US
2 X Wheel Hub Bearing Assembly Front For Nissan Altima 2007 2008-2013 2.5L 5 Lug
Specifications :
- Fits both LH (Driver Side) & RH (Passenger Side)
-
Has ABS sensor
w/stainless steel sensor & plastic wire clips
- Direct fit, designed for vehicle specific application on all makes and models
- Latest generation design used in manufacturing our hub assemblies
- High quality seal design ensures a clean, long lasting hub bearing
- Sensors designed to match specific make and model
- Precision machined and pre-coated with anti-corrosion lubricant
- Manufactured for quick and easy installation
For the following years and models:
Fits Nissan Altima 2007 2.5L 4 Wheel Abs
Fits Nissan Altima 2008-2012 2.5L 4Cyl Engines Only
Fits Nissan Altima 2013 2.5L 4Cyl S Coupe
?
1 Year Warranty
How to Install a Wheel Bearing Hub Assembly :
1. Park the vehicle on a flat, level paved or concrete surface. Place the vehicle in gear or park and apply the parking brake.
2. Place a wheel chock behind a Front tire (or front if you're doing a Front hub-bearing assembly).
3. Loosen the lug nuts on the wheel of the hub bearing you're replacing with the breaking bar and a socket; do not remove them.
4. Lift the wheel with the floor jack in a safe and secure manner. Support the vehicle on a jack stand, preferably on the frame rail if present.
5. Remove the lug nuts and wheel.
6. Locate the caliper bolts and remove them with the ratchet and a socket.
7. Pry the caliper off gently using a large straight-edged screwdriver and support the caliper on the coil spring with a bungee cord. Do not allow the caliper to dangle on the rubber brake hose.
8. Locate the caliper bridge bolts (if applicable) and remove them with the ratchet and a socket. You may want to break them loose with the breaking bar first if they're really tight. On some vehicles, the brake pads will remain in the bridge and can be removed by prying out with the screwdriver. On other models, the pads stay intact and may be clipped to the caliper. If you have to remove the pads, do so by taking note how they were placed in the bridge and be sure you're able to put them back in the same manner they were extracted.
9. Remove the rotor. If it is stuck to the hub, you may have to hit it with a large rubber mallet. Use a rubber mallet if you're not going to replace the rotor, so you don't damage the surface.
10. Remove any ABS wires attached to the hub bearing assembly (if applicable) or unclip the wire and trace it to the plug. In many applications, if the ABS wire is integrated with the wheel-bearing hub assembly, a new one will come with it. If you're not sure, check the box of the new bearing and if there's an ABS wire, follow the wire until you locate the plug, unplug it and unclip it from its mounts. If ABS is present but not integrated with the bearing assembly, remove the sensor from the bearing with a ratchet and socket.
11. Remove the spindle nut with the breaking bar and a spindle nut socket. Remove the washer behind the spindle nut.
12. Locate the wheel-bearing assembly bolts behind the knuckle, and loosen them with the breaking bar and socket. The location of these can sometimes create a tight area to place a socket and tool on to remove them with. You may have to apply some ingenuity. Replace the socket on the ratchet to extract the bolts quickly and easier. Most hubs have three or four bolts.
13. Install the slide hammer onto the lug studs and secure with tightened lug nuts. This may take several attempts and a couple of breaks in between to remove the hub bearing from the knuckle. Pay close attention to your progress and try to determine when the bearing will separate. Take note of how the backing plate is installed between the knuckle and the bearing so you can replace it in the same manner.
14. Sand off the rust and corrosion around the knuckle with a fine- to medium-grade sandpaper. Move the drive-shaft spindle around to get it out of your way. Take your time when doing this and make sure it's as clean as possible.
15. Place the backing plate in its original position and place the new bearing onto the knuckle. Manipulate the drive-shaft spindle splines into the center of the hub bearing. Push the bearing on as far as you can, making sure to line it up correctly if ABS lines or plugs are present.
16. Replace the wheel-bearing assembly bolts. They're pretty long, so as soon as you can thread them into the new bearing, start to tighten them. Pull the bearing in by tightening the bolts a little bit at a time and then switching to the next bolt to make sure the bearing assembly does not shift in the knuckle and cause damage. Once the bearing is drawn in flush, use the breaking bar to get the bolts as tight as you can get them.
17. Replace washer and spindle nut and tighten to proper torque specifications with the half-inch drive torque wrench and spindle socket.
18. Replace the brakes in the same manner you extracted them. You may need to push the caliper piston in a bit with a C-clamp to get it over the rotor. Plug in the ABS lines or reattach them to the bearing, if applicable.
19. Replace the tire and lug nuts, and tighten the lug nuts as tight as you can get them.
20. Lower the vehicle and tighten the lug nuts in an alternate fashion with the torque wrench and socket at the correct wheel nut specifications torque setting.
21. Pump the brake pedal if you had to push the caliper piston in with a C-clamp to restore hydraulic pressure to that caliper piston.
22. Remove the wheel chock, release the parking brake, and go for a test drive.
Item Specifics
Brand :
Preminumwheel spacer
Manufacturer Part Number :
PWS993802002
Position on Vehicle :
Driver Side or Passenger Side Front
Warranty :
12 months
ABS Sensor :
Yes（Has ABS with Tone Ring Sensor）
Packing :
2 Pcs wheel bearings & hub
Spline Quantity :
29
Lug Quantity :
5 Lugs
Flange Bolt Hole Quantity :
4
Flange Shape :
Rectangle
Material :
steel
Surface Finish :
Polished, Rust Protected
Weight :
16LB
Bolt Circle Diameter :
4.5In.
Brake Pilot Diameter :
2.68In.
Flange Diameter :
5.35In.
Flange Offset :
1.6In.
Hub Pilot Diameter :
3.66In.
Wheel Pilot Diameter :
2.6In.
Interchange Part Number :
wheel bearings 513294
Fitment Chart :
Fits Nissan
Cross number :
402029HC0A 40202JA000 40202JA010
Payment
Shipping
Returns
Contact Us
We accept paypal only
We only ship to verified PayPal addresses. Please make sure your PayPal address is verified and up to date before sending payment. We cannot change any address after checkout has been completed. Please make sure you submit your correct address!
1. Items will be shipped within 24 hours after getting your verified payment.
2. 2.US Storage& UNITED STATES by fast shipping. We offer 24 hours dispatch and estimated delivery time is 3-5 business days.except weekend and other irresistible factors. Please feel free to contact us if you haven't receive the item after the estimated shipping time
1.Defective products can be exchanged or returned for full price refund within 30 days after you receive the item.
2.Any returning or exchanging item must be in new condition and cannot be tempered.
3. Buyers are responsible to pay the return shipping fee or exchange shipping fee.
4.Please contact us by eBay email first before you return the item Every week we have new items put on sale , if the items you don't need now ,you also cam often come to visit my store, maybe one day you can buy the items in our stores which you need.
We hightly appreciate that you can refer to us or email us before you leaving Negative feedback or Neutral feedback .We will offer help to resolve your problems as fast as possible.
All rights reserved.
Shop Category
Store Home
wheel hub bearing
wheel spacers
ABS wheel speed sensor
wheel lug nut
Hot Item
(2) Front Wheel Hub Bearing Assembly For 1994-99 Dodge Ram 1500 3.9/5.2/5.9L 4X4
USD 88.29
Pair Set Of 2 Front Or Rear Wheel Hub Bearing ABS For Traverse GMC Acadia Saturn
USD 85.46
Fits Nissan Rogue 2008-2013 Sentra 2007-2012 Front Wheel Bearing Hub Assembly
USD 39.83
(2) For Infiniti G35 G37 Ex35 Fx35 Fx37 Qx50 Qx70 AWD Front Bearing Hub Assembly
USD 70.18
Pair(2)Wheel Bearing and Hub Assembly Front fits 08-13 For Nissan Rogue Sentra
USD 71.24
Excellent Delivery
New List Item
Right Side Rear ABS Anti-Lock Brake System ABS Sensor For Audi TT 1.4L 2008-2009
USD 12.84
Left or Right Front ABS Speed Sensor Fits GMC Savana 1500 2500 Yukon Hummer H2
USD 15.50
Front Right ABS Wheel Speed Sensor Fits Chrysler Sebring Journey Crew ALS2410
USD 14.41
Fits Dodge Challenger 08-10 & Magnum Front Left or Right ABS Wheel Speed Sensor
USD 16.71
ABS Wheel Speed Sensor Rear Left ALS469 For Volkswagen Passat CC Audi A3 2.0L
USD 12.98